 |
|
Hand Functions of Myoelectric and 3D-Printed Pressure-Sensored Prosthetics: A Comparative Study
Kyu Ho Lee, Hobeom Bin, KeunBae Kim, So Young Ahn, Bong-Ok Kim, Soo-Kyung Bok
Ann Rehabil Med. 2017;41(5):875-880. Published online 2017 Oct 31 DOI: https://doi.org/10.5535/arm.2017.41.5.875
|
|
Citations to this article as recorded by
 Vascularized Composite Allograft Versus Prosthetic for Reconstruction After Facial and Hand Trauma
Olivier F. Noel, Mihai G. Dumbrava, Deborah Daoud, Alexander J. Kammien, Martin Kauke-Navarro, Bohdan Pomahac, David Colen
Annals of Plastic Surgery.2024; 92(1): 100. CrossRef A 3-D-Printed Portable EMG Wristband for the Quantitative Detection of Finger Motion
Haotian Su, Tae-Ho Kim, Hadi Moeinnia, Woo Soo Kim
IEEE Sensors Journal.2023; 23(7): 7895. CrossRef Functional performance and patient satisfaction comparison between a 3D printed and a standard transradial prosthesis: a case report
Christopher Copeland, Claudia Cortes Reyes, Jean L. Peck, Rakesh Srivastava, Jorge M. Zuniga
BioMedical Engineering OnLine.2022;[Epub] CrossRef The efficacy of robot-assisted training for patients with upper limb amputations who use myoelectric prostheses: a randomized controlled pilot study
Tuğba Aydin, Fatma Nur Kesiktaş, Yusuf Doğan Akbulut, Mustafa Çorum, Kadriye Öneş, Taha Kizilkurt, Nazli Derya Buğdayci, Ilhan Karacan
International Journal of Rehabilitation Research.2022; 45(1): 39. CrossRef A qualitative study on stakeholder perceptions of digital prosthetic socket fabrication for transtibial amputations
Amanda L. Mayo, Sarah Gould, Stephanie R. Cimino, Shane Glasford, Evan Harvey, Matt Ratto, Sander L. Hitzig
Prosthetics & Orthotics International.2022; 46(6): 607. CrossRef 3D printing and amputation: a scoping review
Danielle Ribeiro, Stephanie R. Cimino, Amanda L. Mayo, Matt Ratto, Sander L. Hitzig
Disability and Rehabilitation: Assistive Technology.2021; 16(2): 221. CrossRef Video Game–Based Rehabilitation Approach for Individuals Who Have Undergone Upper Limb Amputation: Case-Control Study
N A Hashim, N A Abd Razak, H Gholizadeh, N A Abu Osman
JMIR Serious Games.2021; 9(1): e17017. CrossRef Concept, Design, Initial Tests and Prototype of Customized Upper Limb Prosthesis
Corina Radu (Frenț), Maria Magdalena Roșu, Lucian Matei, Liviu Marian Ungureanu, Mihaiela Iliescu
Applied Sciences.2021; 11(7): 3077. CrossRef Clinical Utility of an Exoskeleton Robot Using Three-Dimensional Scanner Modeling in Burn Patient: A Case Report
So Young Joo, Seung Yeol Lee, Yoon Soo Cho, Sangho Yi, Cheong Hoon Seo
Journal of Burn Care & Research.2021; 42(5): 1030. CrossRef Customized Power Wheelchair Joysticks Made by Three-Dimensional Printing Technology: A Pilot Study on the Environmental Adaptation Effects for Severe Quadriplegia
Hee Dong Shin, Da Hyun Ahn, Hyun Ah Lee, Yun Kyung Lee, Hee Seung Yang, Min Jo, Seul Bin Na Lee, Gwan Su Park, Yun Sub Hwang, Woo Sob Sim, Sung-Jun Park
International Journal of Environmental Research and Public Health.2021; 18(14): 7464. CrossRef Myoelectric prosthesis: a potential emerging therapeutic in restoring function post-arm amputation complicated by necrotizing fasciitis
D’Shaun D Adams, Francisco A Schwartz-Fernandes
Journal of Surgical Case Reports.2020;[Epub] CrossRef Re-assessing the Design Needs of Trans-Radial Amputees in Product Design Innovation
Muhammad Jameel Mohamed Kamil, Sarah Moi Li Shi, Mohd Najib Abdullah Sani
Wacana Seni Journal of Arts Discourse.2020; 19: 61. CrossRef Utilizing 3D printing for prosthetic limbs in developing nations and conflict zones
Madeline Rae Rosenberger
Craft Research.2020; 11(1): 9. CrossRef Low-cost sensor-integrated 3D-printed personalized prosthetic hands for children with amniotic band syndrome: A case study in sensing pressure distribution on an anatomical human-machine interface (AHMI) using 3D-printed conformal electrode arrays
Yuxin Tong, Ezgi Kucukdeger, Justin Halper, Ellen Cesewski, Elena Karakozoff, Alexander P. Haring, David McIlvain, Manjot Singh, Nikita Khandelwal, Alex Meholic, Sahil Laheri, Akshay Sharma, Blake N. Johnson, Virgilio Mattoli
PLOS ONE.2019; 14(3): e0214120. CrossRef
|